How to make your owl vinyl

Step one: Go to the 'Inkee' Selection in your vinyls. All used will come from this. Select the highlighted vinyl shown in the picture and place on your car. Use the 'Scale' to make it a little bit wider and taller. Change the colors to your likings.



Step 2: Place two of the highlighted vinyl shown on the right side on your car. One of these you will 'Flip', 'Rotate', 'Scale', and 'Move' until it forms the wing on your left. Change colors. The second one you will 'Rotate', 'Scale', and 'Move' until it mirrors your left side. Change colors. When done, it should look like the picture above.



Step 3: Again, place two of the chosen vinyl shown on the right on your car. 'Scale' to the smallest possible size. Place as the eyes, and select the brightest red.



Step 4: After placing the correct vinyl, 'Scale' and 'Move' until it's positioned as the beak. Zone 1 of your color will be the main scheme you have gone with. Zone 2 will be the orange.



Step 5: 'Scale' this next vinyl to make it wider and shorter for the rounded out body. Change colors.



Step 6: This last vinyl, 'Scale' it a bit smaller to connect the wings to the body. Layer it down to the very first position after doing this so the body is on top. Change color.

Congratulations, you have now made your Night Owl Shadows owl.

That is a cool looking owl.

Nice work cat